2.Apply a light film of oil such as Sears household oil to the spindle nose.
3.Place the chuck on the spindle nose and screw the locking collar up as far as it will go.
4.Insert a piece of 1/4" dia. STEEL ROD in to one of the holes in the chuck body.
5.Insert the CHUCK KEY into one of the holes in the
collar ...TURN IT IN THE DIRECTION OF ARROW UNTIL IT IS TIGHT.
6.To remove chuck, turn the collar in the opposite direction until the chuck is ejected from the spindle.
SPINDLE NOSE
LOCKING COLLAR
CHUCK
LOCKING COLLAR
N
CHUCK KEY
CHUCK BODY
iNSTALLING FEED HANDLES
1.Screw a FEED HANDLE into each of the threaded holes in the hub, and tighten.
\
t
/
t
QUILL LOCK
HANDLE