Sears 565. 66480 owner manual This unit is not designed for 50 Hz or any, Open

When a cook cycle is completed, the turntable as it was at the start. If however, you open the the original position.

will continue to turn until it reaches the same position door it will stop immediately even if it has not reached

..-, • . .

Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged.

1.Select a level surface that provides enough open space (see illustration at right) for the inlet and/or outlet vents.

•Leave a minimum clearance of 3 inches (7.5 cm) above the oven.

•Do not remove the legs from the bottom of the oven.

OPEN

•Blocking the inlet and/or outlet openings can damage the oven.

•Do not install oven over a range, cooktop or other heat-producing appliance.

2.Plug your oven into a standard 120-volt /60-Hz household outlet. Be sure the electrical circuit is at least 15 amperes and that your microwave oven is the only appliance on the circuit.

A minimum clearance of 3 inches (7.5 cm) is required between the oven and any adjacent wall. One side must be open.

NOTE:

This unit is not designed for 50 Hz or any

circuit other than a 120-volt/60-Hz AC circuit. This oven is designed for countertop installation only. Insertion into a cabinet or wall will damage the product and void the wa rra nty.

5