UsingYour Oven

Before UsingYour Oven

Be sure you understand how to set the control properly. Practice removing and replacing the shelves

while the oven is cool Read the information and tips

on the following pages. Keep this manual handy where you can refer to it, especially during the first weeks of using your new range.

Lighting Instructions for

Standing Pilot Models

Some models have standing oven pilots that must be lit initially_

To fight the oven pilot:

1.Be sure the OVEN CONTROL knob is in the OFF position.

2.Open the broiler drawer and remove the broiler pan and grid. This will malce it easier for you to reach inside the broiler compartment.

3. Find

the oven

pilot

port at

_,

compartment.

The

long

 

robe,

running

from

front

/"

tothe back, isofthethe ovenbroiler

I

)

burner.

The

pilot

port

is

\

at the

back,

about

one

 

'_

inch below

the burner.

 

 

4.Using a long match or match holder, reach in and light the oven pilot.

•To fight the oven burner, turn the OVEN

CONTROL lmob to the desired temperature° The burner should light within 60 seconds°

• Proper

flame

configuration:

 

While using

the

oven

burner,

visually check

the

burner

flame

in

the

broiler

compartment°

If flame

does not

burn

as described in

the Installation

section

of

this

manual,

adjust

the

flame

following

the directions

on

those

pages_

 

•Power failure: An electrical power failure will not affect a lighted standing oven pilot°

Lighting Instructions for

Electric Ignition Models

The oven burner is righted by electric ignition (on

some models).

To right the burner, turn the OVEN CONTROL

knob to the desired temperature. The burner should ignite within 30-90 seconds.

After the oven reaches the selected temperature, the

oven burner cycles--off completely, then on with a full

flame--to keep the oven temperature controlled.

Power Outage

CAUTION: Do not make any attempt to operate the electric ignition oven during an electrical power failure° The oven or broiler cannot be lit during a power failure_ Gas will not flow unless the glow bar is hot.

If the oven is in use when a power failure occurs, the oven burner shuts off and cannot be re-lit until

power is restored.

Oven Control

The OVEN CONTROL knob

is located on the control panel

on the front of the range.

Simply turn the knob to the

desired cooldng temperatures°

It will normally take 30-90 seconds before the flame

comes Ono After the oven reaches the selected

temperature, the oven burner cycles--off completely,

then on with a fiAl flame--to maintain the selected

temperature.

Oven Light

(on some models)

Use the switch on the control panel to turn the oven

light on and off.

(continued next page)

13

Page 12 Page 14
Page 13
Image 13
Sears 61111, 71751, 71068, 71351, 71168, 71161, 71668, 71061 Some models, Oven Control, Oven Light, Before UsingYour Oven
Page 12 Page 14

61018, 61111, 61118, 61061, 61011 specifications

Sears has been a staple in the retail industry for decades, and its line of products, particularly in outdoor equipment, has garnered attention from consumers looking for reliability and performance. Among the various items in their catalog, the Sears models 71751, 71068, 71351, 71168, and 71161 stand out for their innovative features and technologies.

The Sears 71751 is designed with a robust engine that delivers exceptional power for heavy-duty tasks. Its ergonomic design ensures user comfort, which is vital during extended use. The model is equipped with advanced cooling technology that prevents overheating, allowing users to complete their tasks without interruptions. With its versatile design, this equipment is suitable for both residential and commercial applications.

On the other hand, the Sears 71068 focuses on user-friendly operation. It features an intuitive control panel and a lightweight structure, making it easy to handle even for those new to outdoor equipment. This model boasts a high-efficiency engine that reduces fuel consumption while maintaining excellent performance, which is a critical factor for environmentally conscious consumers.

The Sears 71351 offers a unique blend of classic design and modern technology. This model is equipped with smart connectivity options, enabling users to monitor its performance through a mobile app. This feature adds value by allowing users to track maintenance schedules and operational efficiency, ensuring that the equipment functions optimally at all times.

The Sears 71168 is particularly known for its durability and all-weather capabilities. Constructed with heavy-duty materials, this model is resistant to corrosion and wear, making it ideal for outdoor use in various conditions. Furthermore, its noise-reduction technology ensures quiet operation, allowing users to work without disturbing the neighborhood.

Lastly, the Sears 71161 caters to those seeking a compact yet powerful solution. It features a foldable design that makes it easy to transport and store without sacrificing performance. This model also incorporates energy-efficient technology, making it an environmentally friendly option while delivering sufficient power for a range of tasks.

In summary, Sears models 71751, 71068, 71351, 71168, and 71161 showcase an impressive range of features that cater to different user needs. From robust engines to smart technology and eco-friendly designs, each model provides a unique solution for outdoor equipment challenges, reaffirming Sears' commitment to quality and innovation in the retail landscape.
Top Page Image Contents