Sears 61011, 71751, 71068, 71351, 71168, 71161, 71668 Questions? Before You Call for Service, Problem

Questions? Before You Call for Service...

PROBLEM

TOP BURNERS DO NOT LIGHT OR DO NOT BURN EVENLY

POSSIBLE CAUSE

•Make sure electrical plug is plugged into a live power outlet.

•Burner holes on the side or around the top of burner may be clogged. Remove burners (on models with standard twin burners) or burner heads (on models with sealed burners) or burner caps on spill-proof models, and clean them with a sewing needle or twist-tie. Make sure you do not enlarge

the holes. On spill-proofmodels, check electrode area for burned-on food or grease.

BURNER FLAMES VERY LARGE OR YELLOW

SURFACE BURNERS LIGHT BUT OVEN DOES NOT

•Make sure the drip pans are installed correctly

•Pilot(s) is (are)not lit (on standing pilot models). See the Lighting

Instructions for Standing Pilot Models section in Surface Cooking.

•tf range is connected to LP gas, contact the person who installed your range t or made the Conversion.

•The oven gas Shut-offvalvemay have accidentally been moved during cleaning or moving.

To check the oven gas shut-offvalve on standard twin burner models, raise the

cooktop arid !ook for the gas shut-offlever at the extreme right rear corner.

Follow the directions in boxA or B that match your regulator type.

[\B

shown closed/
	I	Lever shown closed /
Standard Twin Burner Models	Standard	Twin Burner Models

_Ib check the oven gas shUt-off valve on sealed burner models, remove

the storage drawer, broiler drawer or kick panel and look for the gas shut- off lever at the back of the range.

g-<<........ f2'

Sealed Burner Models

4O