Sears 71661 STEP Check Ignition of Surface Burners, C Soft blue flames--Normal for natural gas

Stand-by pilot flame

Heater pilot flame

4.Turn the OVEN CONTROL knob to a setting above 200°F (93°C). The pilot flame will increase in size

and impinge on the temperature-response element° The oven burner will light in 30-90 seconds.

The oven burner will operate until the set temperature

is reached. The oven burner will continue to cycle on

and off as necessary to maintain the oven at the

temperature indicated by the OVEN CONTROL !mob.

STEP 6

Check Ignition of Surface Burners

Operation of all cooktop and oven burners should be checked after the pilots have been lighted (on some models) and range and gas supply lines have been carefully checked for lealcso

Standing Pilot Models

Select a top burner knob and simultaneously push in and turn to HI position. The burner should light

within a few seconds. Try each burner in succession until all burners have been checked.

Hectric Ignition Models

Select a top burner knob and simultaneously push in and turn to LITE position. You will hear a snapping

sound indicating proper operation of the spark module° Once the air has been purged from the supply lines, burners should light within 4 seconds. After burner lights, rotate knob out of the LITE position. Try each burner in succession until all burners have been checked.

Quality of Flames

The combustion quality of burner flames needs to be determined visually,

(A) Yellow flames--Call for service

(B) Yellow tips on outer

cones--Normal for LP gas

(C) Soft blue flames-- Normal for natural gas

if burner flames look like (A), call for service. Normal burner flames should look like (B) or (C), depending on the type of gas you use.

With LP gas, some yellow tipping on outer cones is

normal.

STEP 7

Check Ignition of Oven Burner

Your oven is designed to operate quietly and

automatically. To operate the oven, turn the OVEN

CONTROL knob to a setting above 200°E (93°C°)o After 30-90 seconds, the oven burner will ignite and

burn until the set temperature is reache& The oven

burner will continue to cycle on and off as necessary to

maintain the oven at the temperature indicated by the

OVEN CONTROL knob.

Hectric ignition models require electrical power to operate. The oven cannot be lit during a power outage. Gas wilt not flow unless the glow bar is hot.

If the oven is in use when a power outage occurs, the oven burner wil! shut off and cannot be re-lit until

power is restore&

(continued next page)

37