Installation Instructions on oood

PREPARATION

Remove all tape and packaging. Lift up the cooktop (on models with standard twin burners) and remove any packing material under it, Make sure the standard twin burners are properly seated and level.

Remove plastic film that covers some chrome parts (around oven door, side trim),

"Take the accessory pack out of the oven.

Check to be sure that no range parrs have come loose during shipping°

STEP I

Provide Adequate Gas Supply

Your range is designed to operate at a pressure of 4" (10_2 cm) of water column on natural gas or, if designed for LP gas (propane or butane), 10" (25°4 cm) of water column. Make sure you are supplying your range with the type of gas for which it is designed.

This range is convertible for use on natural or propane gas. If you decide to use this range on LP gas,

conversion must be made by a qualified LP installer

before attempting to operate the range on that gas.

For proper operation, the pressure of natural gas supplied to the regulator must be between 4" (t0.2 cm) and 13" (33 cm) of water column. For LP gas, the pressure supplied must be between 10" (25.4 cm) and 13" (33 cm) of water column. When checking for proper operation of the regulator, the inlet pressure must be at least 1" (2.5 cm) greater than the operating (manifold) pressure as given above. The pressure regulator located at the inlet of the range manifold must remain in the supply line regardless of whether natural or LP gas is being used. A flexible metal appliance connector used m connect the range to the gas supply line should have an I.D. of 1/2" and be

5 feet (1.5 m) in length for ease ofinstallatiom In Canada, flexible connectors must be single wall metal connectors no longer than 6 feet (1o8 m) in length.

STEP 2

Connect the Range to Gas

Shut off the main gas supply valve before disconnecting

the old range and leave it off until new hook-up has

been completed. Don't forget to relight the pilot on other gas appliances when you turn the gas back on.

Because hard piping restricts movement of the range,

the use of an A,G.Ao-certifled flexible meta! appliance

connector is recommended unless local codes require a

hard-piped connection,, Never use an old connector when installing a new range. If the hard piping method is used, you must carefillly align the pipe; the

range cannot be moved after the connection is made.

To prevent gas leaks, put pipe joint compound on, or wrap pipe thread tape with Teflon* around, all male (external) pipe threads.

"Teflo n: Registered tradernak of DuPont

Gas Pipe and Electric Outlet Locations

for Hodels Equipped with Sealed Burners

This area aiiows

for flush range installation with

through-the-wall connection of pipe

stub/shut-off

valve and rear wall 120V outlet.

Shortest

connection

from hard pipe stub location to

range hookUpr

This area allows for

flush range installation with through-the-floor

connection of pipe stublshut-off valve,

32

Page 32
Image 32
Sears 71351, 71751, 71068, 71168 Installation Instructions on oood, Provide Adequate Gas Supply, Connect the Range to Gas

61018, 61111, 61118, 61061, 61011 specifications

Sears has been a staple in the retail industry for decades, and its line of products, particularly in outdoor equipment, has garnered attention from consumers looking for reliability and performance. Among the various items in their catalog, the Sears models 71751, 71068, 71351, 71168, and 71161 stand out for their innovative features and technologies.

The Sears 71751 is designed with a robust engine that delivers exceptional power for heavy-duty tasks. Its ergonomic design ensures user comfort, which is vital during extended use. The model is equipped with advanced cooling technology that prevents overheating, allowing users to complete their tasks without interruptions. With its versatile design, this equipment is suitable for both residential and commercial applications.

On the other hand, the Sears 71068 focuses on user-friendly operation. It features an intuitive control panel and a lightweight structure, making it easy to handle even for those new to outdoor equipment. This model boasts a high-efficiency engine that reduces fuel consumption while maintaining excellent performance, which is a critical factor for environmentally conscious consumers.

The Sears 71351 offers a unique blend of classic design and modern technology. This model is equipped with smart connectivity options, enabling users to monitor its performance through a mobile app. This feature adds value by allowing users to track maintenance schedules and operational efficiency, ensuring that the equipment functions optimally at all times.

The Sears 71168 is particularly known for its durability and all-weather capabilities. Constructed with heavy-duty materials, this model is resistant to corrosion and wear, making it ideal for outdoor use in various conditions. Furthermore, its noise-reduction technology ensures quiet operation, allowing users to work without disturbing the neighborhood.

Lastly, the Sears 71161 caters to those seeking a compact yet powerful solution. It features a foldable design that makes it easy to transport and store without sacrificing performance. This model also incorporates energy-efficient technology, making it an environmentally friendly option while delivering sufficient power for a range of tasks.

In summary, Sears models 71751, 71068, 71351, 71168, and 71161 showcase an impressive range of features that cater to different user needs. From robust engines to smart technology and eco-friendly designs, each model provides a unique solution for outdoor equipment challenges, reaffirming Sears' commitment to quality and innovation in the retail landscape.