Usage Situations Where Appliance Power Cord
Will Be Disconnected FREQUENTLY:
Do not use an adapter plug in these situations
because disconnecting of the power cord places undue strain on the adapter and leads to eventual fail-
ure of the adapter ground terminal The customer should have the
The installation of appliances designed for mobile home installation must conform with the Manufactured
Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or, when such standard is not applicable, the Standard for Manufactured Home Installations, lat-
est edition (Manufactured Home Sites, Communities and
Electrical Disconnect
1. Locate disconnect
plug at left rear of burner box on the
range back.
2. Pinch sides of con-
nector and pull out of range back.
Step 4
Seal the Openings
Seal any openings in the wall behind the range and in the floor under the range when hookups are completed.
Step 5
Check Ignition of Surface Burners
Operation of all cooktop and oven burners should be checked after range and gas supply lines have been carefully checked for leaks..
Select a top burner knob and simultaneously push in and turn to LITE position. You will hear a snapping sound indicating proper operation of the spark mod- ule. Once the air has been purged from the supply lines, burners should light within 4 seconds. After
burner lights, rotate knob out of the LITE position. Try each burner in succession until all burners have been checked..
Quality of Flames:
The combustion quality of burner flames needs to be determined visually.
(A) Yellow
(B) Yellow tips on outer cones--
Normal for LP gas
(C) Soft blue flames-- Normal for natural gas
•If burner flames look like (A), call for service. Normal burner flames should look like (B) or (C), depending on the type of gas you use.
°With LP gas, some yellow tipping on outer cones is normal.
Check ngnition of Oven Burner
Your oven is designed to operate quietly and automati- cally. To operate the oven, turn the OVEN SET knob to BAKE and OVEN TEMP knob to 350°R After
seconds, the oven burner will ignite and burn until the set temperature is reached. The oven burner will con- tinue to cycle on and off as necessary to maintain the
oven at the temperature indicated by the OVEN TEMP knob.
The oven requires electrical power to operate. The oven cannot be lit during a power outage. Gas will not flow unless the glow bar is hot.
If the oven is in use when a power outage occurs, the oven burner will shut off and cannot be
power is restored..
(continued next page)
7
