4. Attach the PulseSensor (114) to the Head6and (115).
Make sure that thesensor windowis pres_sed through
the indicated hole in the Headband.
Press open theclothes clip,and insert the pulsesensor
wire into the clothes clip. Make sure that the pulse
sensor wire is resting against the hinge of the
clothes clip (see the Inset drawing). The use of the
pulse sensor is explained on page 8.
4 Sensor 114 I \ Clothes
_Clothes Clip
115 Pulse Sensor Wire"_
5. Remove the backing from theAdhesive Clip (90). Press
the Clip onto the Rear RollerCover (82) inthe indicated
location. Press the Allen Wrench (89) intothe Clip.
Make sure that all parts are tightened before you use the
treadmill. Note: To protect the floor or carpet, place a mat
under the treadmill. For Information on ordering a mat,
see REPLACEMENT PARTS on the back cover. 89
7