Sennheiser EM 3731-II, EM 3732-I, I EM 3732-II Command Overview of the displays, 01.01CH, 776.000 Hz

Product overview

Overview of the displays

After switch-on, the receiver displays the “Bank/Channel” status display. For further illustrations and examples of the different status displays, refer to page 38.

Each display provides information on the operating states of the receiver and those of the received transmitter.

￿ ￿		￿ ￿	￿	￿	￿
	A RF B	% DEV	M
	300	PEAK	776.000 Hz
	100	100
	30	50	BANK	HDP	AF COM
	10		01.01CH
	∝V	10
	￿		￿	￿	￿

Reception display

￿RF level display “RF” for antenna A

￿Diversity display (antenna A or antenna B active)

￿RF level display “RF” for antenna B

￿Audio level display “DEV”

￿Display for the squelch threshold

For additional information, refer to page 10.

Status display

￿Frequency display

￿“MHz” – appears when the frequency is displayed

￿6-step transmitter battery status display

￿Command display (status display for the audio outputs AF and Command)

(EM 3732 COM-II twin receiver only)

￿Display for the compander system

￿Display for the current frequency bank and channel or the name

For additional information, refer to page 11.

Brightness control

The display has an automatic brightness control. The brightness is dimmed after the last button press. With each new button press, the display lights up with full brightness.

Triggers for dimming	after	Behavior of the display
No operation	60 s	Display is slightly dimmed
Squelch not reached	20 min	Display goes off

9