Putting the receiver into operation
Scanning
Connecting the receivers to a PC via Ethernet
The receivers can be centrally configured and monitored via a PC and the supplied “Wireless Systems Manager” software. Additionally, you can update the firmware in the receivers.
If you want to connect several receivers to the same Ethernet socket of your network, you require a standard
Connect the supplied RJ 45 Ethernet cable to the RJ 45 socket for LAN connection F and to your switch or network.
Install the “Wireless Systems Manager” software on your PC.
Continue as described in the instruction manual of the “Wireless
Systems Manager” software.
The LED for LAN data transmission E lights up when data is trans- mitted.
When you are working with the “Wireless Systems Manager” software, you can use the “Spectrum Analyzer” tool to perform a continuous frequency scan. The “Spectrum Analyzer“ tool uses the receiver that you select to check the relevant frequency range for signals and records the corresponding measured values. For detailed information, please refer to the chapter “The ’RF Spectrum Analyzer’ tool” of the “Wireless Systems Manager” manual.
When selecting this receiver in the “Spectrum Analyzer”, please note that during the frequency scan:
•you cannot use the selected receiver for its normal purpose,
•the text “Scanning” is displayed and
•the receiver is automatically muted.
18