Product overview

 

 

 

 

 

Status display

 

M

The status display shows the receiving frequency, the transmitter battery

 

 

776.000 z

status and – depending on the selection made in the “Display” menu –

 

H

NAME

HD

either the frequency bank and the channel number or the name of the

receiver. With the EM 3732 COM-II receiver, the command display can also

P

 

M

776.000Hz

be displayed within the status display. The contents of the status display can be changed in the “Display” menu (see page 38).

When pressing the jog dial 7, the status display is replaced by the operating menu (see “Working with the operating menu” on page 24).

When in the operating menu, you can return to the status display by pressing the esc button 6 one or several times.

Frequency display

The frequency display ￿ shows the current receiving frequency in MHz.

Display for the current frequency bank and channel or the name

01.01 BANK

CH

The display for the current frequency bank and channel or the name ￿ shows – depending on the selection made in the “Display” menu – the following:

•Frequency bank “1...6, U” and channel number “1...60”

•Name

Transmitter battery status display

The 6-step transmitter battery status display ￿ provides information on the charge status of the transmitter’s battery/accupack:

Number of segments

Charge status

 

 

Accupack

Battery

 

approx. 100 %

full

 

approx. 80 %

-

 

approx. 60 %

half-full

 

approx. 40 %

-

 

approx. 20 %

-

(Low Batt)

approx. 0 %

almost empty

Low Batt

If no battery/accupack status signal is received, the battery status display is not shown.

5When the battery/accupack is almost empty, text “Low Batt” flashes in

alternation with the status display. In addition, the warning triangle for indicating error states 5 lights up red.

11