Using the receiver

￿Position the transmitter’s infra-red interface at a max. distance of 5 cm in front of the infra-red interface (sync) A.

 

 

 

The transfer starts automatically. During the transfer, the two blue

save digital audio

A RF B

 

LEDs in the infra-red interface (sync) A flash and the backlighting of

 

the sync button 9 flashes green.

processing

 

300

PEA

sync

100

1

30

 

 

esc

 

– After successful completion of the synchronization, the two blue

∝V

 

sync

 

 

10

 

 

 

 

 

LEDs in the infra-red interface (sync) A stop flashing and the

 

 

 

sync button 9is backlit in green. The receiver’s frequency and name

 

 

 

are now also set on the transmitter and the transmission link is ready

< 5cm

 

 

for operation.

 

 

– If an error occurred during synchronization (e.g. the transmitter is

 

 

 

 

 

 

too far away from the receiver), the two blue LEDs in the infra-red

 

 

 

interface (sync) A stop flashing and the sync button 9 is backlit in

 

 

 

red.

 

 

 

The infra-red interface of the SKM 5200-II hand-held transmitter is

 

 

 

located at the left-hand margin of the display. Position the trans-

 

 

 

mitter’s infra-red interface precisely in front of the receiver’s infra-

 

 

 

red interface (sync) A.

SKM 5200-II

 

 

 

Identifying receivers using the “Wireless Systems

Manager” software (identifying function)

In multi-channel operation, it can be useful to identify the individual channels of the receivers via the “Wireless Systems Manager” software. The identifying function shows you which channel is assigned to which receiver.

￿Start the identifying function as described in the instruction manual of the “Wireless Systems Manger” software.

“Identified” appears on the status display of the identified receiver:

Identified

After 60 seconds, the text disappears and the current status display is shown again.

To change to the current status display before the end of the 60 seconds:

￿ Press the esc button 6.

M

save clock

6.000 Hz

sync

.01CH

AF COM esc

BANK HDP

6

21