Sennheiser EM 3731-II, EM 3732-I, I EM 3732-II Command NAME, NAME, 776.000 Hz, 776.000 Hz, 776.000 Hz, 800.450 Hz, NAME, Auto

Adjustment tips for the operating menu

yn		10
	4	49
us
		68
		75

pander Display IP-Ad

Selecting the status display

Via the “Display” menu, you can select the status display:

Selectable status display		Contents of the display
1.	“Name”
			M
	displays the freely selectable name	776.000 Hz
		NAME	HD
			P
2.	“Bank/Channel”
			M
	displays the frequency bank and the	776.000 Hz
	channel number	01.01	HD
			P
3.	“Name/Command”
			M
	displays the freely selectable name	776.000 Hz
	and the command display	NAME	HD	AF COM
	(EM 3732 COM-II receiver only)		P
4.	“Bank/Channel/Command”
			M
	displays the frequency bank, the channel	800.450 Hz
	number and the command display	BANK HDP		AF COM
	(EM 3732 COM-II receiver only)	03.03
		CH

			776.000	1
			NAME
			7 8
DEV	M			save digital audio
	777.005 Hz			processing
	U.01 CH	HDP	AF COM esc	sync
	BANK

sync

	192.	00 1
	168.
	0.	1B
splay	0	00 0
	IP-Addr	MA

			192.	192.
			168.	049.
			0.	068.
			0
			Auto
			7 8
DEV	M			save digital audio
	777.005 Hz			processing
	U.01 CH	HDP	AF COM esc	sync
	BANK

sync

￿Change to the setting mode of the “Display” menu. The current status display starts flashing.

￿Turn the jog dial 7 to select one of the four status displays.

￿Press the save button 8.

The selected status display becomes effective. The display changes to the selection mode of the operating menu.

Changing the IP address

Via the “IP-Addr” menu, you can display and change the receiver’s IP address. The IP address consists of four bytes and each byte consists of up to three digits (from 0 to 255). The receiver is factory-preset to dynamic IP addressing (“Auto”).

To manually assign an IP address:

￿Change to the setting mode of the “IP-Addr” menu. The first byte starts flashing.

￿Turn the jog dial 7 to select a value between 0 and 255.

￿Press the jog dial 7 to confirm the first byte and change to the next byte.

￿Repeat the last two steps to enter all four bytes.

￿After you have selected the complete IP address, press the save button 8.

￿Switch the receiver off and on again (see page 19). The new IP address becomes effective.

38