Cleaning the receiver

Loading the factory-preset default settings

OFF

000

Via the “Reset” menu, you can reset the current settings to the factory- preset default settings.

ndby Reset

Reset to

factory defaults ? 000

DEV

M

 

save digital audio

 

776.000 Hz

 

processing

 

01.01CH

AF COM

sync

 

esc

 

BANK HDP

sync

￿Change to the setting mode of the “Reset” menu.

The query “Reset to factory defaults?” appears. The green backlighting of the save button 8 flashes.

￿Press the save button 8 until the progress bar is complete.

All settings except for the booster supply voltage, the sampling rate at the digital output and the network address are reset to the factory- preset default settings. The display changes to the selection mode of the operating menu.

Cleaning the receiver

CAUTION!

Liquids can damage the electronics of the receiver!

Liquids entering the housing of the product can cause a short-circuit and damage the electronics.

￿Keep all liquids away from the receiver.

￿Before cleaning, disconnect the product from the mains.

￿Use a dry cloth to clean the product from time to time.

40