Product overview

AFCOM

J K L M

AF

COM

HD

HD

P

X

N O P Q R S

Command display (status display of the audio outputs AF and Command)

The command display is only available with the EM 3732 COM-II twin receiver.

Besides the two audio outputs Kand Mthe EM 3732 COM-II twin receiver also features the two command outputs J and L.

Via the “Command” menu, you can configure the receiver so that – with the command button of the transmitter pressed – the audio signal is available at only one of the outputs or at both (see “Configuring the audio outputs of the EM 3732 COM-II” on page 33).

The command display ￿ shows the audio output at which the trans- mitter’s audio signal is available.

When “AF” lights up brightly, the audio signal is available at the audio output K and/or M.

When “AF” does not appear, the audio signal is not issued on the audio output K and/or M.

When “COM” lights up brightly, the audio signal is available at the command output J and/or L.

When “COM” does not appear, the audio signal is not issued on the command output J and/or L.

Display for the compander system

Depending on the selected compander system, either “HDP” for HiDyn plus ™ or “HDX” is shown on the display.

LEDs for booster supply of antenna inputs

The LEDs for booster supply of antenna input A N and/or B S light up when:

the booster supply voltage is applied to the corresponding antenna input A O and/or B R.

The LEDs for booster supply of antenna input A N and/or B S go off when:

the booster supply voltage for the corresponding antenna input A O and/or B R is switched off or

the booster supply voltage is short-circuited or overloaded.

12