Using the operating menu
M
776.000 Hz
01.01BANK HDP AF COM
CH
776. B.Ch
000 1.01
MHz
Tune Ban
776. B.Ch
000 1.01
MHz
Tune Ban
B.Ch 776.
U.01 000
MHz
776 960
UHFMHz
B.Ch 777.
U.01 225
MHz
776 960
UHFMHz
M | save clock | |
6.000 Hz | sync | |
.01CH | ||
AF COM esc | ||
BANK HDP |
6
Working with the operating menu
By way of example of the “Tune” menu, this section describes how to use the operating menu.
After switching the receiver on, the status display is shown on the display panel.
Getting into the operating menu
Press the jog dial 7.
The status display is replaced by the operating menu.
The “Tune” menu is displayed together with its current setting. The position of a menu within the operating menu is illustrated by a graphic in the upper display margin (the “Tune” menu is on the very left of the operating menu).
Selecting a menu
Turn the jog dial 7until the icon of the desired menu is in the center of the display.
Press the jog dial 7to get into the setting mode of the selected menu.
The icon of the menu is displayed and the current setting starts flashing. In addition, the green backlighting of the save button 8 flashes.
Adjusting a setting
Turn the jog dial 7 until the desired setting appears.
Press the jog dial 7 to confirm the selected setting.
Depending on the selected menu, the next setting that can be changed and confirmed by turning and pressing the jog dial 7 flashes.
Storing a setting
Press the save button 8 to store the setting.
An animation appears on the display, indicating that the setting has been stored. The display then changes to the selection mode of the operating menu.
Exiting the operating menu/cancelling an entry
You can exit the operating menu or cancel an entry at any time.
Press the esc button 6.
An animation appears. The display then returns to the previous menu
level. To return to status display, you may have to press the esc button 6 several times in succession.
24