Adjustment tips for the operating menu
Channel list
Scan new
Scan reset
|
|
| 7 8 |
|
DEV | M |
|
| save digital audio |
| 777.005 Hz |
|
| processing |
| U.01 CH | HDP | AF COM esc | sync |
| BANK |
| ||
|
|
|
| sync |
|
|
| Freq. occupied | B.Ch |
|
|
|
|
776.000 MHz 1.
Channel list
Scan new
Scan reset
Bank 1 2 3
Free 43 40 42
Bank 4 5 6 U
Free 32 31 33 60
Starting the scan
Via the “Scan new” menu, you can scan all frequency banks for free channels. The last scan result is overwritten.
Before starting the scan, switch all transmitters of your system off, since channels used by
Turn the jog dial 7 until the arrow points to “Scan new”.
Press the jog dial 7 to start the scan.
The receiver scans the frequency banks one after the other for free channels. This can take several minutes. After the scan, a table displays
the number of free channels for each frequency bank and the green backlighting of the save button 8 flashes.
You can cancel the scan at any time by pressing the esc button 6. The display changes to the setting mode of the “Scan” menu and the last scan result is restored.
Turn the jog dial 7to select a frequency bank with a sufficient number of free channels.
Press the save button 8.
The selected frequency bank is automatically called up in the “Bank.Ch” menu.
Select a channel from this frequency bank (see “Selecting a frequency bank and a channel” on page 29).
After the scan, the channels that are occupied or subject to interference are marked with a warning triangle and “Freq. occupied”.
Releasing channels that are used or subject to interference
After the scan, the channels that are occupied or subject to interference are marked with a warning triangle and “Freq. occupied”. Via the “Scan reset” menu, you can unmark these channels. The last scan result is deleted.
Turn the jog dial 7 until the arrow points to “Scan reset”.
Press the jog dial 7.
The number of free channels is reset to the maximum for all frequency banks.
|
|
| 7 8 |
DEV |
| M | save digital audio |
| 777.005 Hz | processing | |
| U.01 CH | HDP AF COM | sync |
| esc | ||
| BANK | ||
sync
Turn the jog dial 7 to select a frequency bank.
Press the save button 8.
The selected frequency bank is automatically called up in the “Bank.Ch” menu.
36