Sharp AJ-1800, AJ-2000 manual Paper Size, Tray, Bypass

"Paper" Tab Settings (part 2)

Printer Properties

Paper Size Paper Selection

Select an appropriate paper size for your document from drop-down list.

Select "Tray" or "Bypass" for your print job.

Tray

		Paper is fed to the printer from the paper tray.
Paper	Size
Ledger	11" x 17"	If the "Tray" is selected from this tab and paper is placed in
Letter	8.5" x 11"	the bypass tray, the paper in the bypass tray will be fed first,
Legal	8.5" x 14"
		and then paper will be fed from the paper tray.
Executive	7.25" x 10.5"
A3	297mm x 420mm	Bypass
A4	210mm x 297mm
		Paper will be fed to the printer from the bypass tray. Only one sheet can
A5	148mm x 210mm
B4	257mm x 364mm	be loaded into the bypass tray. To load paper into the bypass, place the
B5	182mm x 257mm	paper into the tray against the guide and press the paper button.
COM10	4.125" x 9.5"
DL	110mm x 220mm	When printing one page:
C6	114mm x 162mm
A6	105mm x 148mm	Load paper into the bypass then start printing from your computer. If
Invitation A2	4.375" x 5.75"
		paper is not loaded before printing is started, the paper lamp on the
Index card 5" x 8"	5" x 8"
		printer will blink and the message "Please set a sheet of paper on
Index card 4" x 6"	4" x 6"
Index card 3" x 5"	3" x 5"	bypass" will appear on the screen of the computer.
Japanese Hagaki	100mm x 148mm
Banner Letter	8.5" x 11"	When printing more than one page:
Banner A4	210mm x 297mm
		Repeat as above for each page.
Custom	Min. : 3.00" x 5.00" (76.2mm x 127.0mm)
	Max. : 11.69" x 17.00" (297.0mm x 431.8mm)
		Make sure to insert "Banner Letter" and "Banner A4"
! The document size must be smaller than the selected		through the bypass tray. Max. 5 sheets of banner paper can
(loaded) paper. If not, printing will occur over the edge of		be set to the bypass tray. Make sure that your application
the paper causing the machine to become internally dirty.		supports Banners when you intend to print onto Banners.

!Ledger, A3, or B4 sized paper can not be loaded in this printer. The print image should be reduced by the "Fit To Paper Size" or "Zoom[%]" setting.

"N-Up Printing", "Fit To Page", and "Zoom[%]" settings are
not available when you select "COM10", "DL", "C6",
"Invitation A2", "Japanese Hagaki", "Banner Letter", or
"Banner A4" sized paper.	10

How to Use the	Printer Properties	Print	Print Status	Sharing Printer	Maintenance	Troubleshooting
Online Manual			Window