Setting the IP Address
11 Wait while the machine writes the setting to the NIC board (“DO
NOT POWER DOWN” will appear in the display). When the display changes to “OK”, turn off the power of the machine and then turn it back on to make the new settings take effect. (Before turning off the power, make sure the machine is not in the middle of a job: 1) check whether the machine is printing, and 2) press
and check the display to see if the machine is sending or receiving a fax.)
Initializing the network interface board
Normally the network interface board (NIC) does not need to be initialized (returned to the factory default settings). In the event that you do need to intialize the board, follow the Steps 1 to 3 of the
previous procedure to access “NETWORK CONFIG SET”, press 
to select “INTIALIZE THE NIC”, and then press | START/ | . Press | to |
ENTER |
START/
select “YES” and then press ENTER . Wait while the machine writes the
setting to the NIC board (“DO NOT POWER DOWN” will appear in the display). When the display changes to “OK”, turn off the power of the machine and then turn it back on to make the new setting take effect. (Before turning off the power, make sure the machine is not in the middle of a job: 1) check whether the machine is printing, and 2) press
and check the display to see if the machine is sending or receiving a fax.)
8
