Enter your name, press | Sharp FONS2 instruction

Sending an Image Using a Rapid Key or Speed Dial Number

3 If the destination is an e-mail

destination and you wish to enter a message, or change the sender name or e-mail address, or select the file format for the document,

press WITHIN 5 SECONDS after pressing the Rapid Key in Step 2.

(After 5 seconds, the document will be scanned and transmitted using the settings that were stored in the Rapid Key.)

1:START SCANNING 2:FROM

XXX

3:FILE FORMAT XXX

4:MESSAGE

NO MESSAGE

4 Press to select the option you want to change, and then

START/

press ENTER . Change the selected option as follows:

•FROM

Enter your name, press	START/	, enter your e-mail address, and press	START/
	ENTER		ENTER .

•FILE FORMAT

Press to select the desired combination of file format (TIFF or PDF)

START/

and compression (G3, G4 or NO COMPRESSION), and then press ENTER .

•MESSAGE

Use the letter entry keys to enter a message (maximum of 256

characters). A line break can be entered by pressing . When

START/

finished, press ENTER .

5 When you have finished changing

the options, press or to select START SCANNING.

1:START SCANNING 2:FROM

XXX

3:FILE FORMAT XXX

4:MESSAGE

NO MESSAGE

6 START/

Press ENTER to begin scanning and transmission.

22

Image 26

Sharp FONS2 operation manual Enter your name, press, Press Enter to begin scanning and transmission

Contents

FO-NS2 Warranty Software License Page Table of Contents Troubleshooting Specifications Introduction Steps required for setup Press Enter Setting the IP AddressPress Menu and then Press Enter the IP gateway. When finished, press Enter Right, press . When finished, press EnterEnter the IP subnet mask. When finished, press Enter If you are entering a permanent IP Initializing the network interface board Printing out the Network Settings Then Mail server and DNS server Mail Server and DNS Server SettingsAccessing the Web page in the machine Setting Passwords Network Scanning and Sender E-mail settings Storing Network Scanning Destinations Storing destinations in the Web Scan to FTP Hyperlink Creating personal books in the Web Information on using Scan to Desktop Scan to E-mail Setup Until Scan to E-MAIL SET-UP is selected To clear a mistake, press DEL To enter a space, pressTo change case, press Time display Press the letter keys to enter your e-mail address see StepThen press Scan to E-mail Using the E-mail Key Load the documents Press Enter . Change the selected option as follows Press Enter If you wish to enter a messagePress to select the option you want to change, and then Press Enter . The document is scanned and transmitted Press the appropriate Rapid Key Sending an Image Using a Rapid Key or Speed Dial NumberSending an image using a Rapid Key Enter your name, press Press Enter to begin scanning and transmission Sending an image using a Speed Dial number Numeric keys If the destination is an e-mail Press Enter . Make sure that Destination Setting is selected Press Enter . Make sure that SET is selected Enter to complete the entry Press To select E-MAIL Editing a Rapid Key or Speed Dial number Clearing a Rapid Key or Speed Dial number Sharpdesk Desktop Document Management Software Installing the Network Scanner SoftwareSoftware Programs Network Scanner Tool Installing Acrobat Reader Users Guides for Software Programs Installing the software programs Setting up Network Scanner Tool Page Page Uninstalling a program Troubleshooting Problem Scan to E-mail is not successful Check Solution Problem Cannot connect to the network Check Solution Error Message at the Communication ErrorProblem Takes a long time to send an image Error Code Table Description of the ErrorPage Warranty Sharp Corporation