Sharp LC-30HV2M Simple button operations for changing channels, Using FLASHBACK (A) on the remote control unit

15
Watching TV
Display
Channel display
MONO
12
SAT.1
12
SAT.1
B/G
PAL
( Displays after 3 secs. )
Simple button operations
for changing channels
Using CHaa
aa
a/bb
bb
bon the remote control unit
•Press CHaa
aa
a to increase channel number.
•Press CHb b
b b
b to decrease channel number.
A
•CHs/r on the Display operates the same as
CHbb
bb
b/aa
aa
aon the remote control unit.
Using FLASHBACK (A) on the
remote control unit
Press A to switch the currently tuned channel to the
previously tuned channel.
Press A again to switch back to the currently tuned
channel.
Using 0 – 9 on the remote control unit
Select the channels directly by pressing buttons 0 to
9.
a
To select a 1-digit channel (e.g. channel 2):
•Press 2. If “2” is indicated and the picture does not
change, press o to switch over to the 1-digit select
mode and press 2 again.
To select a 2-digit channel (e.g. channel 12):
•Press o to set the 2-digit select mode. Press 1,
followed by 2.
A
•Complete this procedure within 3 seconds, otherwise the
selection will not be made on the 2-digit channel mode.
When viewing Teletext information
View a page directly which is a 3-digit page number
from 100 to 899 by pressing buttons 0 to 9. With
Teletext, you do not use o. (See page 62.)
CHs/r