51
Useful adjustment settings
Option

MENU

Fine Sync.
Audio Out
RETURN
[Fixed]
Auto Sync.
Auto Sync.
Adjusting the image 32%

Fine Sync. adjustment

(PC Input mode only)

Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
1Press MENU.
2Press a/b to select “Option”, and then press
ENTER.
3Press a/b to select “Fine Sync.”, and then press
ENTER.
4Press a/b to select the specific adjustment item.
5Press c/d to adjust the item to your desired
position.
6Press MENU to exit the menu.
A
•When all adjustments are set to factory preset values,
1 Press a/b to select “Reset”, and then press ENTER.
2 Press a/b to select “Yes”, and then press ENTER.
•Return to the previous menu by pressing RETURN.
Description
Centres the image by moving it to the left or
right.
Centres the image by moving it to the up or
down.
Adjusts the clock frequency.
Adjusts the clock phase.
Selected item
H-Pos.
V-Pos.
Clock
Phase

Auto Sync. adjustment

(PC Input mode only)

For automatically adjusting the computer image.
1Press MENU.
2Press a/b to select “Option”, and then press
ENTER.
3Press a/b to select “Auto Sync.”, and then press
ENTER.
•Auto Sync. starts and “Adjusting the image.” displays.
A
•Return to the previous menu by pressing RETURN.
•When Auto Sync. is successful, “Auto Sync completed
successfully” displays. If not, Auto Sync. failed.
•Auto Sync. may fail even if “Auto Sync completed
successfully” displays.
•Auto Sync. may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the
PC image and try again.
•Be sure to connect the computer to the AVC System and
switch it on before starting Auto Sync.
Option
MENU
Fine Sync.
H-Pos.
V-Pos.
Clock
Phase
Reset
RETURN
[0]
[0]
[0]
[0]
–90
–60
–90
–20
+90
+60
+90
+20