Sharp LC-30HV2M Colour temperature, Film mode, Press a/bto select Advanced, and then press

Basic adjustment settings

MENU

Picture

USER

Advanced

Colour Temp [Mid]

High

Mid-High

Mid

Mid-Low

Low

MENU

Picture

USER

Advanced

Film Mode [On]

Off

On

Colour temperature

Adjust the colour temperature to give a better white balance.

1 Press MENU.

2 Press a/bto select “Picture”, and then press

ENTER.

3 Press a/bto select “Advanced”, and then press

ENTER.

4 Press a/bto select “Colour Temp”, and then press

ENTER.

5 Press a/bto select the desired level, and then press ENTER.

6 Press MENU to exit the menu.

A

•Return to the previous menu by pressing RETURN.

•If you select “STANDARD” with AV MODE on the remote control unit, this item will display in grey and not be selectable. (See page 53.)

Selected item	Description
High	White with Bluish tone
Mid-High
Mid
Mid-Low
Low	White with Reddish tone

Film mode

Automatically detects a film-based source (originally encoded at 24 frames/second), analyses it then recreates each still film frame for high-definition picture quality.

1 Press MENU.

2 Press a/bto select “Picture”, and then press

ENTER.

3 Press a/bto select “Advanced”, and then press

ENTER.

4 Press a/bto select “Film Mode”, and then press

ENTER.

5 Press a/bto select “On”, and then press ENTER. 6 Press MENU to exit the menu.

A

•Return to the previous menu by pressing RETURN.

•If you select “STANDARD” with AV MODE on the remote control unit, or input sources with 1080I, 720P or 480P component signals, this item will display in grey and not be selectable. (See page 53.)

Selected item	Description
Off	Normal viewing mode
On	Detects, analyses, converts film source.
	Occasionally, when you select “On” for a
	non-film-based 580i source, the picture
	becomes unstable. In that case, select
	“Off”.

34