Sharp LC-30HV2M operation manual Moving the picture on the screen, Useful adjustment settings

Useful adjustment settings

Moving the picture on the screen

You can move the picture around on the screen.

Press a/b/c/dto move an image on the screen to the desired position. Press ENTER to return to the initial image position.

A

• While pressing a/b/c/d, an on-screen image, “Adjusting Position” displays to the desired position.

• This setting cannot be stored. Once the System shuts down or enters standby mode, the setting is erased. To move the picture around the screen again, you must perform the above procedure again.

• The image position setting using the steps on page 49 can be stored. Select either according to your objectives.

• “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4” and “PC” modes can each adjust the image position setting on this page. The same for WIDE modes.

• An on-screen image from a PC source cannot be moved.

• Even when the image fills the screen, its position can be adjusted with this function.

50