Sharp LC-30HV2M operation manual Turning on the power, Turning off the power

Watching TV

Display

POWER button

MAIN POWER button

POWER indicator

AVC System

STANDBY/ON indicator

POWER button

Turning on the power

1 Press MAIN POWER on the Display.

•The POWER indicator on the Display flashes red.

2 Press POWER on the AVC System.

•The System turns the power on.

•The POWER indicator on the Display lights up green and the STANDBY/ON indicator on the AVC System lights up green.

•If the POWER indicator on the Display and the STANDBY/ON indicator on the AVC system still light up red, press B on the remote control unit or POWER button on the Display to turn the System on.

When turning the AVC System on first

1 Press POWER on the AVC System.

•The STANDBY/ON indicator on the AVC System lights up red.

2 Press MAIN POWER on the Display.

•The System turns the power on.

•The POWER indicator on the Display lights up green and the STANDBY/ON indicator on the AVC System lights up green.

•If the STANDBY/ON indicator on the AVC system and the POWER indicator on the Display still light up red, press B on the remote control unit or POWER button on the Display to turn the System on.

A

•In this manual, “System” above means the Display and AVC System.

•The initial auto installation starts when the System powers on for the first time. If the System has been turned on before, the initial auto installation will not be invoked. See page 21 to try auto installation from the Setup menu.

Turning off the power

1 Press B on the remote control unit or POWER button on the Display.

•The System enters standby mode and the image on the screen disappears.

•Both the POWER indicator on the Display and the STANDBY/

ON indicator on the AVC System change from green to red.

2 Press POWER on the AVC System.

• The STANDBY/ON indicator on the AVC System turns off and the POWER indicator on the Display flashes red.

3 Press MAIN POWER on the Display.

• The POWER indicator on the Display turns off immediately.

A

•If you are not going to use this System for a long time, be sure to remove the AC cords from the power outlet.

Display status indicators

Off	Power off
Flashing red	AVC System does not turn on or its AC cord is disconnected.
Red	The System is in standby mode.
Green	The System turns the power on.

AVC System status indicators

Off	Power off
Red	Only the AVC System is in standby mode or the System is in standby mode.
Green	The System turns the power on.

13