39
Basic adjustment settings
Power control
Power Control setting allows you to reduce the display brightness to save energy.
A
•When setting to “Auto”, make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
•“Standard” is factory preset value.
•Return to the previous menu by pressing RETURN.
Power control for AV source
Power save
When set to “Save1”, “Save2” or “Auto”, power
consumption is reduced by decreasing picture
brightness.
1Press MENU.
2Press a/b to select “Power control”, and then
press ENTER.
3Press a/b to select “Power Save”, and then press
ENTER.
4Press a/b to select the desired mode, and then
press ENTER.
5Press MENU to exit the menu.
Description
The screen darkens slightly to conserve
power consumption.
The screen darkens more significantly to
conserve power consumption.
Screen brightness adjusts according to
the ambient light of the room to conserve
power consumption.
Selected item
Save1
Save2
AUTO (OPC)
MENU
Power control
Power Save [Save1]
Standard
Save1
Save2
Auto
MENU
Power control
No Signal off [Enable]
Disable
Enable
No signal off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
1Press MENU.
2Press a/b to select “Power control”, and then
press ENTER.
3Press a/b to select “No Signal off”, and then press
ENTER.
4Press a/b to select “Enable”, and then press
ENTER.
5Press MENU to exit the menu.
•Five minutes before the power shuts down, a warning
will display every minute.
A
•“Disable” is factory preset value.
•Return to the previous menu by pressing RETURN.
•When a TV programme finishes, but the AVC System
receives signal input, this function may not operate.