Sharp LC-30HV2M Watching a DVD image, Using external equipment, Connecting a DVD player

Using external equipment

Watching a DVD image

Connecting a DVD player

You can use the INPUT 1 terminal when connecting a DVD player and other audiovisual equipment.

AVC System (rear view)	Component video cable
	(commercially available)

		COMPONENT
	Y	PB	PR	Y	PB	PR
						INPUT 1	DISPLAY OUTPUT-1
INPUT 3						RS-232C
ANT						DISPLAY OUTPUT-2
						INPUT 2
ANT/CABLE 75Ω							AC INPUT
MONITOR OUTPUT S-VIDEO	VIDEO		R-AUDIO-L	S-VIDEO
							110-240V

AV cable

(commercially available)

When using component video cable, select “COMPONENT” for “Input Select” in the menu.

S-video cable (commercially available)

MENU

Option

Input Select

Input1[AUTO]

AUTO

AV-Y/C

COMPONENT

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

PC

DVD player

Displaying a DVD image

When connecting to the INPUT 1 terminals, select “INPUT1” and set the correct input signal type on “Input Select” in the menu. (See page 52.)

The setting is stored and can be selected on the “INPUT SOURCE” menu.

To watch a DVD image, select “INPUT1” from “INPUT SOURCE” menu using b on the remote control unit or INPUT on the Display. (See page 52.)

A

•Each time b is pressed, the input source toggles.

•If the DVD image does not come in clearly, you may need to change the input signal type setting on the “Input Select” menu.

•Refer to your DVD player operation manual for the signal type.

43