Sharp LC-30HV2M 1, 2, 3, 4, 5

52
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
Useful adjustment settings
Option
MENU
Input Select
Input1 [AUTO]
AUTO
COMPONENT
AV-Y/C
Option
MENU
Input Select
Input3 [AUTO]
AV-Y/C
COMPONENT
AUTO
INPUT 1 signal menu
INPUT 3 signal menu
Input selection
Can use for selecting the input source.
1Press b on the remote control unit or INPUT on
the Display.
•INPUT SOURCE menu displays.
2Hold down b on the remote control unit or INPUT
on the Display to select the input source.
•An image from the selected source automatically
displays.
•You can also select the input source by pressing
a/b.
A
•Items grayed out are not selectable.
•Return to the previous menu by pressing RETURN.
Input signal source
Input signal setting
For setting the signal type of external equipment.
1Press MENU.
2Press a/b to select “Option”, and then press
ENTER.
3Press a/b to select “Input Select”, and then press
ENTER.
4Press a/b to select an input source you want to
set, and then press ENTER.
5Press a/b to select a signal type, and then press
ENTER.
•If the selected signal type is incorrect, an image does
not display or no colour image displays.
6Press MENU to exit the menu.
A
•Return to the previous menu by pressing RETURN.
•The System automatically sets input signals from “INPUT2,
INPUT4” and “PC”.
•If no image displays, try to change the signal type.
•Check the operation manual of the external equipment
for the signal type.
•Setting INPUT 1 and INPUT 3 signal selection to “AUTO”
when other equipment is connected will result in the
following connectivity priority.
INPUT 1
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
INPUT 3
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO