Sharp LC-30HV2M operation manual Viewing an image from a computer, Connecting a computer, Computer

Using external equipment

Viewing an image from a computer

Connecting a computer

Use the PC terminals to connect a computer.

A

•The PC input terminals are DDC1/2B-compatible.

•Refer to page 66 for a list of computer signals compatible with the System.

AVC System (front view)

RGB cable (commercially available)

							ø 3.5 mm stereo minijack cable			Computer
							(commercially available)
Signal names for 15-pin mini D-sub connecter
5	4	3	2	1		Pin No.	Signal name	Pin No.	Signal name	Pin No.	Signal name
						1	R	6	GND (Ground)	q	Not connected
10	9	8	7		6
						2	G	7	GND (Ground)	w	SDA
15	14	13	12	11
						3	B	8	GND (Ground)	e	HD
						4	Not connected	9	5V	r	VD
						5	CSYNC	0	GND (Ground)	t	SCL

A

• Macintosh adaptor may be required for use for some Macintosh computers.

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

PC

Displaying an image from a computer

When connecting to a computer, the correct input signal type is automatically detected.

If the computer image does not come in clearly, you may need to set the Auto Sync. adjustment on the “Auto Sync.” in the menu. (See page 51.)

You only need to select the input source on the “INPUT SOURCE” menu.

To view an image from a computer, select “PC” from the “INPUT SOURCE” menu using b on the remote control unit or INPUT on the Display. (See page 52.)

A

•Each time b is pressed, the input source toggles.

•PC INPUT terminals cannot be used for audiovisual equipment.

47