Quick setup for LODGENET users
Room Mode
You can set “Maximum Volume”, “R/C Buttons”, “TV Buttons” and “TV INPUT Button” for the ROOM mode.
1Press MENU and the MENU screen displays.
2Press c/d to select “PPV TV”.
3Press a/b to select “Room Mode”, and then press ENTER.
4Press a/b to select the desired item, and then press ENTER.
5For “Maximum Volume”, press c/d to set the volume.
For “R/C Buttons”, “TV Buttons” and “TV INPUT Button”, press c/d to select “Respond” or “No Respond”, and then press ENTER.
Selected item | Description |
|
|
Maximum | Set the maximum volume in the |
Volume | ROOM mode. |
|
|
R/C Buttons | Select “Respond” to enable or “No |
| Respond” to disable the functions of |
| the remote control unit. |
|
|
TV Buttons | Select “Respond” to enable or “No |
| Respond” to disable the functions of |
| the TV buttons. |
|
|
TV INPUT | Select “Respond” to enable or “No |
Button | Respond” to disable the functions of |
| the INPUT button on the TV. |
|
|
6Press MENU to exit.
NOTE
•Maximum Volume setting from the hotel server has priority over the TV setting.
•When you set the Maximum Volume lower than the Default Volume, the Default Volume setting will be automatically set to the same level as the Maximum Volume.
•Some buttons on the remote control unit will not work in the ROOM mode even though “R/C Buttons” is set to “Respond”.
•Depending on the Room Mode setting, press MASTER or ROOM on the Remote Replicator to turn on or turn off the TV.
•“TV INPUT Button” is grayed out when “TV Buttons” is set to “No Respond”.
•For resetting all Room Mode adjustment items to the factory preset values, select “Reset” in step 4.
CH
Sets the channel order (logical channel) to your preferred order.
1Press MENU and the MENU screen displays.
2Press c/d to select “PPV TV”.
3Press a/b to select “CH
4Press a/b to select “CH Set”, and then press
ENTER.
5Press a/b/c/d to select the Logical CH you want to set, and then press ENTER.
6Press a/b to select “ANALOG” , “DIGITAL” or the desired input source, and then press
ENTER.
When you select “ANALOG” or “DIGITAL”, input the channel number by using 0 – 9, and then press ENTER.
•Select “Reset” for resetting the channel to the factory preset value.
•When you input digital channels with a single number after the dot, input 0 after the dot.
(e. g., Channel 22.1):
Press 0s2s2s0s1sENTER
4Repeat the steps 5 and 6 until all desired logical channels are set.
5Press MENU to exit.
NOTE
•For resetting all logical channels to the factory preset values, select “CH Reset All” in step 4, press c/d to select “Yes”, and then press ENTER.
11