Basic adjustment settings

Channel memory setting

1Press MENU to display the MENU screen, and then press c/d to select “Setup”.

2Press a/b to select “CH Setup”, and then press ENTER.

•If you already set the Secret No., input the 4-digit secret number here. See page 62 for setting a secret number.

3

Press a/b to select “CH Memory”, and then

press ENTER.

4Press a/b to select ANALOG (Air), ANALOG (Cable), DIGITAL (Air) or DIGITAL (Cable), and then press ENTER.

5When viewing ANALOG broadcasts:

1Press c/d to select the channel to skip, and then press b to move down.

2Press c/d to select “On”, and then press

ENTER.

When viewing DIGITAL broadcasts:

1 Press a/b to select the channel to skip, and then press c/d to select “On”.

•On: Skips channels. (Channel selection disabled using CH r/s.)

•Off: Does not skip channels. (Channel selection enabled using CH r/s.)

6Press MENU to exit.

NOTE

•Make sure what kind of connection is made with your TV.

•“CH Memory” is not available in the MASTER mode.

Antenna Setup - DIGITAL

PPV TV

NORMAL TV

In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confi rm the antenna confi guration through the “Antenna Setup - DIGITAL” screen.

If necessary, adjust the direction of the antenna to obtain the maximum signal strength.

Signal Strength

1Press MENU to display the MENU screen, and then press c/d to select “Setup”.

2Press a/b to select “Antenna Setup - DIGITAL”, and then press ENTER.

3Press a/b to select “Signal Strength”.

•The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel.

Signal Strength

Channel Strength

Signal Strength

Current

0

Max

0

 

 

 

 

4Press MENU to exit.

Channel Strength

The channel signal strength can also be checked separately.

1Repeat steps 1 and 2 in Signal Strength in Antenna Setup - DIGITAL.

2Press a/b to select “Channel Strength”, and then press ENTER.

3Input the 2-digit channel number to check the signal strength of the selected channel.

•Make sure the signal is strong enough for each channel.

Signal Strength

 

 

1

 

2 CH

Channel Strength

 

 

 

 

 

Signal Strength

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Current 0

 

 

 

Max 0

 

 

 

 

 

 

 

 

 

4Press MENU to exit.

NOTE

• This function is available for DIGITAL (Air) only.

45