Basic adjustment settings
EZ Setup | PPV TV |
NORMAL TV |
You can run EZ Setup again, even after setting up the preset channels.
Language setting
Channel Setup | PPV TV |
NORMAL TV |
If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.
Select from among 3 languages: English, French and Spanish.
1Press MENU to display the MENU screen, and then press c/d to select “Setup”.
2Press a/b to select “EZ Setup”, and then press ENTER.
•If you already set the Secret No., go to step 3. If not, skip to step 4.
Antenna setting
1Press MENU to display the MENU screen, and then press c/d to select “Setup”.
Press a/b to select “CH Setup”, and then
2press ENTER.
•If you already set the Secret No., input the
3Input the
4Press a/b to select the desired language listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your TV when selecting “Air” or “Cable”.
5Press c/d to select “Air” or “Cable”. Press ENTER to enter the setting.
Channel search
Channel auto search makes the TV look for all channels viewable in the set area.
6When “Air” is selected in Antenna setting: Press c/d to select “Start”, and then press
ENTER.
When “Cable” is selected in Antenna setting:
Press a/b to select “Analog & Digital Search Start” to search both analog and digital broadcasts or “Analog Search Start” to search only analog broadcasts, and then press
ENTER.
•The Channel search will start automatically.
•To exit the Channel search screen, select “Cancel”, and then press ENTER.
7Press MENU to exit.
NOTE
•If no channel is found, confi rm the type of connection made with your TV and try EZ Setup again.
•If you select “Analog Search Start” and initiate the channel search, the CH Memory for Cable Digital will be deleted.
•In the PPV TV mode, you need to perform EZ Setup when the RF frequency setting for the channels that are the same as the channel in the hotel server are changed.
44
3Press a/b to select “Air/Cable”, and then press ENTER.
4Press c/d to select “Air” or “Cable”. Press ENTER to enter the setting.
5Press MENU to exit.
Channel search
Channel auto search makes the TV look for all channels viewable in the set area.
1Repeat steps 1 and 2 in Antenna setting in Channel Setup.
2Press a/b to select “CH Search”, and then press ENTER.
3When “Air” is selected in Antenna setting: Press c/d to select “Start”, and then press
ENTER.
When “Cable” is selected in Antenna setting:
Press a/b to select “Analog & Digital Search Start” to search both analog and digital broadcasts or “Analog Search Start” to search only analog broadcasts, and then press
ENTER.
•The Channel search will start automatically.
•To exit the Channel search screen, select “Cancel”, and then press ENTER.
4Press MENU to exit.
NOTE
•If no channel is found, confi rm the type of connection made with your TV and try channel search again.
•If you select “Analog Search Start” and initiate the channel search, the CH Memory for Cable Digital will be deleted.
•In the PPV TV mode, you need to perform CH Setup when the RF frequency setting for the channels that are the same as the channel in the hotel server are changed.