Other viewing options

Freezing images

PPV TV

NORMAL TV

Allows you to capture and freeze a moving image that you are watching.

1Press FREEZE.

• A moving image is captured.

2Press FREEZE again to cancel the function.

NOTE

•When this function is not available, “No displaying still image available.” will display.

•The still image automatically goes out after 30 minutes.

•If you are using the freeze function and a broadcast activates the V-CHIP BLOCK, the freeze function will be cancelled and a V-CHIP BLOCK message will appear.

Presetting remote control function

You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit.

Presetting manufacturer codes

1

Press FUNCTION until the LED for your

device lights up.

 

2

After the LED for your device lights up,

press FUNCTION and DISPLAY at the

 

same time to enter the code registration

 

mode. The LED will blink.

3

Press 0–9to enter the manufacturer code.

(See page 69.)

 

 

• Preset mode is fi nished once the LED no

 

longer lights up.

4After registering the code, the LED will stop blinking then turn off after one second. (If you perform an incorrect operation, the LED will blink quickly then turn off.)

68