Quick setup for NXTV users

For quick setup, use the remote control unit to perform the following operations. Before the setup, press MASTER on the Remote Replicator to turn on the TV in the MASTER mode.

PPV TV

TV Mode

[PPV TV]

PPV System

[NXTV]

Default Channel

[2]

Default Volume

[20]

Room Mode

 

CH Re-Map

 

Reset

 

PPV System

Sets the Pay Per View system.

1Press MENU and the MENU screen displays.

2Press c/d to select “PPV TV”.

Press a/b to select “PPV System”, and then

3press ENTER.

4Press a/b to select “NXTV”, and then press

ENTER.

•The TV will automatically turn off. Press MASTER on the Remote Replicator to turn on the TV again.

Default Channel

Sets the default channel.

1Repeat steps 1 and 2 in PPV System.

2Press a/b to select “Default Channel”, and then press ENTER.

Press a/b to select “Analog/Digital”, and

3then press ENTER.

4Press c/d to select “Analog” or “Digital”, and then press ENTER.

5Press a/b to select “Analog” or “Digital”, and then press ENTER.

Input the default channel number by using

60 – 9, and then press ENTER.

•The channel number is based on the physical number, and it may be different from the displayed channel number specifi ed by the hotel server.

7Press MENU to exit.

NOTE

•Default Channel setting from the hotel server has priority over the TV setting when the TV is connected to the PPV terminal box (ONLINE).

•The TV returns to the default channel when the TV is turned on and is not connected to the PPV terminal box (STAND ALONE).

17