Other settings for the PPV TV mode
Function menu (for LODGENET and nSTREAMS users only)
You can display the Function menu by pressing the FUNCTION button on the LODGENET or nSTREAMS remote control unit. The Function menu items displayed such as “Parental CTRL”, “Language”, “View Mode” and “Input Select” depend on the Function Menu Setup.
Use the LODGENET or nSTREAMS remote control unit for the following operations.
1Press FUNCTION to display the Function menu.
2Press c/d to select “Function”.
Function
Sleep Timer | [Off] |
Parental CTRL |
|
Closed Caption | |
Language | [English] |
View Mode | [S.Stretch] |
Input Select |
|
|
|
3Press a/b to select the desired menu item, and then press SELECT.
•The items in the Function menu depend on the Function Menu Setup.
4Perform the steps below for each item.
Selected item | Description |
|
|
Sleep Timer | Press a/b to select the desired |
| setting, and then press SELECT. |
|
|
Parental CTRL | See pages 62 to 67. |
|
|
Closed Caption | Press SELECT to select the desired |
| setting. |
|
|
Language | Press a/b to select the desired |
| language, and then press SELECT. |
|
|
View Mode | Press a/bto select the desired screen |
| size, and then press SELECT. |
|
|
Input Select | Press a/b to select the desired input |
| source, and then press SELECT. |
|
|
4Press FUNCTION to exit.
NOTE
•Parental CTRL may not be available when the hotel server commands not to display the Parental CTRL menu.
•Sleep Timer and Parental CTRL settings are effective for 24 hours. The other settings will be canceled when the TV is turned off.
Option menu (for LODGENET and nSTREAMS users only)
You can display the Option menu by pressing the FUNCTION button on the LODGENET or nSTREAMS remote control unit when the TV is connected to a
Use the LODGENET or nSTREAMS remote control unit for the following operations.
1Press FUNCTION to display the Option menu.
2Press c/d to select “Option”.
Option
Input Signal | [1024g768] |
Auto Sync. |
|
|
|
3Press a/b to select the desired menu item, and then press SELECT.
4Perform the steps below for each item.
Selected item | Description |
Input Signal Press a/b to select the desired input signal, and then press SELECT.
Auto Sync. Press c/d to select “Yes”, and then press SELECT.
5Press FUNCTION to exit.
NOTE
•“Input Signal” and “Auto Sync.” are grayed out when “Input Select” is set to “DIGITAL”.
30