Watching TV

Simple button operations for changing channels

You can change channels in several ways.

Method 1

Using CH r/son the remote control unit or on the TV.

Method 2

1Press FLASHBACK to switch to the previously tuned channel.

2Press FLASHBACK again to switch back to the currently tuned channel.

NOTE

•FLASHBACK will not work if no channel has been changed after the TV is turned on.

NOTE

•If you change the channel in the MASTER mode by using 0–9on the remote control unit of LCD TV when the

TV is connected to the PPV terminal box, the terminal transmission is used so the displayed channel number will not match the inputted channel or channel may be changed automatically.

Method 3

Using remote control buttons 0-9, • (DOT) to select channels for VHF/UHF/CATV/DIGITAL.

To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5sENT

Air

Air ANALOG

5

5

NOTE

•When selecting a 1-digit channel number, it is not necessary to press 0 before the number.

•When you enter 0-9only, channel selection will be made if there is no operation within a few seconds.

To select a 3-digit channel number (e. g., Channel 115):

Press 1s1s5

Cable

Cable

Cable ANALOG

1

11

115

To select a 4-digit channel number (e. g., Channel 22.1):

Press 2 s2 s • (DOT) s1sENT

Air

Air

Air

Air

Air

DIGITAL

2

 

22

22.

22.1

22.1

NOTE

•When you enter 0–9only, channel selection will be made if there is no operation within a few seconds.

•If you push “0” by itself, nothing will happen.

•Complete the above steps within a few seconds.

•When you enter 0–9and • (DOT), channel selection will be made if there is no operation within a few seconds.

37