Using external equipment

Displaying an external

PPV TV

equipment image

NORMAL TV

 

To view external source images, select the input source from INPUT on the remote control unit or on the TV.

Input Select

NORMAL TV

 

If the image does not come in clearly from the external equipment connected to INPUT 1 or 2 (LC-42HT3U only), you may need to change the input signal type setting on the “Input Select” menu.

1Press MENU to display the MENU screen, and then press c/d to select “Option”.

2Press a/b to select “Input Select”, and then press ENTER.

Press a/b to select the signal type you want

3to set, and then press ENTER.

•If the selected signal type is incorrect, images are not displayed or displayed without any color.

Auto

COMPONENT

VIDEO

1Press INPUT.

• A list of selectable sources appears.

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

INPUT5

INPUT6

2Press INPUT again to select the input source.

•An image from the selected source automatically displays.

•Each time INPUT is pressed, the input source toggles.

•You can also select the input source by pressing a/b.

•If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.

NOTE

• See pages 33 and 34 for external equipment connection.

4Press MENU to exit.

•The setting is stored and can be selected on the “INPUT SOURCE” menu.

NOTE

•Refer to your external equipment operation manual for the signal type.

•If you set INPUT 1 or 2 (LC-42HT3U only) to Auto, the TV will automatically select the input signal.

•Setting INPUT 1 or 2 (LC-42HT3U only) signal selection to “Auto” when other equipment is connected will result in the following connection priority.

INPUT 1 or 2 (LC-42HT3U only):

1 COMPONENT VIDEO

2VIDEO

51