Useful adjustment settings
Auto Sync. adjustment (for | PPV TV |
Analog PC input mode only) | NORMAL TV |
For automatically adjusting the PC image.
1Press MENU to display the MENU screen, and then press c/d to select “Setup”.
2Press a/b to select “Auto Sync.”, and then press ENTER.
Press c/d to select “Yes”, and then press
3ENTER.
•Auto Sync. starts and “Now adjusting the image.” displays.
|
|
|
|
|
| Yes |
| No |
|
|
|
|
|
|
Fine Sync. adjustment | NORMAL TV |
| PPV TV |
Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image.
1Press MENU to display the MENU screen, and then press c/d to select “Setup”.
2Press a/b to select “Fine Sync.”, and then press ENTER.
Press a/b to select the specifi c adjustment
3item.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| [ 90] | a |
|
| b |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| [ 39] | a |
|
| b |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Clock | [ 90] | a |
|
| b |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Phase | [ 20] | a |
|
| b |
|
|
|
|
|
|
|
|
|
| Reset |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selected item | Description |
|
|
Centers the image by moving it to the | |
| left or right. |
|
|
Centers the image by moving it up or | |
| down. |
|
|
Clock | Adjust when the image fl ickers with |
| vertical stripes. |
|
|
Phase | Adjust when characters have low |
| contrast or when the image fl ickers. |
|
|
30%
4Press MENU to exit.
NOTE
•When Auto Sync. is successful, “Completed” displays. If not, Auto Sync. failed.
•Auto Sync. may fail even if “Completed” displays.
•Auto Sync. may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing Auto Sync.
•Be sure to connect the PC to the TV and switch it on before starting Auto Sync.
4Press c/d to adjust the item to your desired position.
5Press MENU to exit.
NOTE
•For resetting all Fine Sync. adjustment items to the factory preset values, press a/b to select “Reset”, and then press ENTER.
•It is not necessary to adjust the “Clock” or “Phase” when a digital signal is being input, so it cannot be selected.
53