Press a/b/c/d to select the Logical CH you want to set, and then press ENTER.

Quick setup for nSTREAMS users

CH Re-Map

Sets the channel order (logical channel) to your preferred order.

1Press MENU and the MENU screen displays.

2Press c/d to select “PPV TV”.

3Press a/b to select “CH Re-Map”, and then press ENTER.

4Press a/b to select “CH Set”, and then press

ENTER.

5

6Press a/b to select “ANALOG” , “DIGITAL” or the desired input source, and then press

ENTER.

When you select “ANALOG” or “DIGITAL”, input the channel number by using 0 – 9, and then press ENTER.

•Select “Reset” for resetting the channel to the factory preset value.

•When you input digital channels with a single number after the dot, input 0 after the dot.

(e. g., Channel 22.1):

Press 0s2s2s0s1sENTER

7Repeat the steps 5 and 6 until all desired logical channels are set.

8Press MENU to exit.

NOTE

•For resetting all logical channels to the factory preset values, select “CH Reset All” in step 4, press c/d to select “Yes”, and then press ENTER.

View Mode

You can set the picture size for when the TV is turned on.

1Press VIEW MODE.

• The View Mode menu displays.

2Press VIEW MODE or a/b while the View Mode menu is still on the screen.

•You can sequentially select a View Mode that has its own aspect ratio.

View Mode

Side Bar

S. Stretch

Zoom

Stretch

Side Bar:

Suitable for viewing conventional 4:3 programs in their normal format.

S.Stretch (Smart stretch):

Suitable for stretching 4:3 programs to fi ll the screen.

Zoom:

Suitable for viewing wide- screen 2.35:1 anamorphic DVDs in full screen.

Stretch:

This mode is useful for 1.78:1 DVDs.

When viewing 1.85:1 DVDs, stretch mode will still show very thin black bands at the top and bottom of the screen.

You can set other menu items, such as Brightness, in the PPV TV mode. (See pages 41 to 67.)

When you are fi nished setting the menu items, perform steps 3 to 8 on page 7 to complete the storing and transferring of the data to the TV.

22