Sharp LC-37G2X, TU-32GAX, TU-37GAX Basic adjustment settings 3D-Y/C Monochrome, Film mode, Setting

Basic adjustment settings

3D-Y/C	Monochrome
Provides high quality images with minimal dot crawl	For viewing a video in monochrome.
and cross colour noise.

1

2

3

Press MENU and the MENU screen displays.

Press c/dto select “Picture”.

Press a/bto select “Advanced”, and then press ENTER.

1	Repeat steps 1 to 3 in 3D-Y/C.
2	Press a/b to select “Monochrome”, and
	then press ENTER.
3	Press c/d to select “On”, and then press
	ENTER.

4	Press a/b to select “3D-Y/C”, and then
	press ENTER.
	C. M. S. – Hue
	C. M. S. – Saturation
	C. M. S. – Value	Standard
	Colour Temp	Fast
	Black	Slow
	3D Y/C
	Monochrome
	Film Mode
	I/P Setting

5 Press a/bto select the desired level, and then press ENTER.

Selected item	Description
Standard	Normal adjustment
Fast	For movie image
Slow	For still image

NOTE

•“3D-Y/C” is not selectable depending on the input signal type.

Activating 3D-Y/C on the remote control unit

Press 3D-Y/Cto switch the 3D-Y/C function on and off.

NOTE

•“3D-Y/C” is set to “On” when the System is turned back on.

•3D-Y/C may not operate depending on the input signal type.

Film mode

Automatically detects a film-based source (originally encoded at 24/25 frames/second, depending on the vertical frequency), analyses it then recreates each still film frame for high-definition picture quality.

1	Repeat steps 1 to 3 in 3D-Y/C.
2	Press a/bto select “Film Mode”, and then
	press ENTER.
	• Some items may be greyed out. They are not
	selectable.
3	Press c/d to select “On”, and then press
	ENTER.

I/P setting

Adjusting the image and input signal can give you a more beautiful picture.

1	Repeat steps 1 to 3 in 3D-Y/C.
2	Press a/bto select “I/P Setting”, and then
	press ENTER.
	• Some items may be greyed out. They are not
	selectable.

3 Press c/d to select “Interlace” or “Progressive”, and then press ENTER.

NOTE

• The I/P Setting is set to Progressive when Film Mode is “On”.

33