Using external equipment
Connecting a PC
Use the INPUT5 terminals to connect a PC.
NOTE
•The PC input terminals are
•Refer to page 67 for a list of PC signals compatible with the System.
AVC System (rear view)
To watch the image from this input terminal, you need to select input source (see page 46) and input signal type (see page 52).
DVI cable (commercially available)
ø 3.5 mm stereo minijack cable (commercially available)
PC
RGB/DVI conversion cable (commercially available)
ø 3.5 mm stereo minijack cable (commercially available)
PC
NOTE
•Macintosh adaptor may be required for use for some Macintosh computers.
•When connecting to a PC, the correct input signal type is automatically detected. (See page 57.) If the PC image does not come in clearly, you may need to set the Auto Sync. adjustment in the “Setup” menu. (See page 51.)
49
