Using external equipment
Speaker Setup
Connecting external speakers
Rear view
How to connect the
speaker cable
1 Push down the tab.
2Insert the end of the
cable.
3Lift the tab back
up.
When using external speakers
• Change the speaker setting to
Make sure to connect the speaker terminal and cable polarity (L, +) properly
•The speaker terminal has plus (L) and minus (+) polarity.
•Plus is red and minus is black.
•The cables are also divided into plus and minus.
•When connecting the left/right speakers, be sure to connect the plus/minus terminals with the correct cables.
NOTE
•Unplug the AC cord from the AC outlet before installing the speakers.
CAUTION
•Make sure external speakers have 4 ohm and 10 watt specifications.
•Connect the plus/minus terminals with the correct cables. Incorrect connection may cause a short.
Selecting speakers
You can output audio using the supplied speakers or other external speakers.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Setup”.
3 Press a/bto select “Speaker Setup”, and then press ENTER.
4 Press a/b to select “Speaker”, and then press ENTER.
5 Press c/d to select
Selected item | Description |
|
|
Speaker connected to the Display. | |
|
|
Speaker connected to the AVC System. | |
|
|
External Audio Bypass
External Audio Bypass automatically optimises the audio quality to suit internal (supplied) speakers.
1 Repeat steps 1 to 3 in Selecting speakers above.
2 Press a/b to select “External Audio Bypass”, and then press ENTER.
3 Press c/dto select “Yes” or “No”, and then press ENTER.
Selected item | Description | |
|
| |
No | Sets the optimum audio for the internal | |
(supplied) speakers. | ||
| ||
|
| |
Yes | When you are using your own speakers, | |
output the original sound. | ||
| ||
|
|
NOTE
•External Audio Bypass is greyed out when Dolby Virtual is set to “On”.
•When using external speakers
•When Dolby Virtual is on, External Audio Bypass automatically sets to “Yes”.
50
