Watching TV
Display
POWER button
MAIN POWER button
POWER indicator
AVC System
POWER button
POWER indicator
Turning on the power
Make sure that the system cable is connected before turning on the power.
1 Press MAIN POWER on the Display.
•POWER indicator (Green): The System is on. (After a few seconds, programme information appears with sound.)
•POWER indicator (Red): The System is in standby. (Go to step 2.)
2 Use any of the methods below to power on. Powering on changes the LED from red to green.
•Press the POWER button on the Display.
•Press POWER on the AVC System.
•Press POWER on the remote control.
Turning off the power
Press POWER on the remote control unit.
• The System enters standby mode and the image on the screen disappears.
• Both POWER indicators change from green to red.
Press MAIN POWER on the Display.
• The POWER indicator on the Display gradually turns off.
• When the System is turned off by MAIN POWER , you cannot turn on the power by pressing POWER.
NOTE
•If you are not going to use this System for a long period of time, be sure to remove the AC cords from the power outlet.
•Weak electric power is still consumed even when both MAIN POWER and POWER are turned off.
POWER indicator
Off | Power off |
|
|
Red | The System is in standby mode. |
|
|
Green | The System is on. |
|
|
NOTE
• Check if the system cable is connected properly when display indicator flashes red.
19
