Useful adjustment settings

Fine Sync. adjustment (PC input mode only)

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimise the image.

1 Press MENU and the MENU screen displays.

2

Press c/dto select “Setup”.

3

Press a/bto select “Fine Sync.”, and then

 

press ENTER.

4

Press a/bto select the specific

 

adjustment item.

 

 

 

 

 

 

 

H-Pos.

[90]

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V-Pos.

[39]

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clock

[90]

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Phase

[20]

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset

 

 

 

 

 

 

 

 

 

 

 

 

5 Press c/dto adjust the item to your desired position.

NOTE

For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press

ENTER.

Selected item

Description

 

 

H-Pos.

Centres the image by moving it to the left or

right.

 

 

 

V-Pos.

Centres the image by moving it to the up or

down.

 

 

 

Clock

Adjusts when the image flickers with

vertical stripes.

 

 

 

Phase

Adjusts when characters have low contrast

 

or when the image flickers.

 

 

Input Select

Selecting input source

Can use for selecting the input source.

1 Press TV/VIDEO on the remote control unit or TV/VIDEO on the Display.

2 Press TV/VIDEO on the remote control unit or TV/VIDEO on the Display to select the input source.

An image from the selected source automatically displays.

You can also select the input source by pressing a/b.

Selecting input signal type

For setting the signal type of external equipment.

1 Press MENU and the MENU screen displays.

2 Press c/dto select “Option”.

3 Press a/bto select “Input Select”, and then press ENTER.

4 Press a/b/c/dto select a signal type you

want to set, and then press ENTER.

If the selected signal type is incorrect, an image does not display or no colour image displays.

Input type

Selectable item

 

 

INPUT 1

AUTO, COMPONENT, VIDEO

 

 

INPUT 2

AUTO, S-VIDEO, VIDEO

 

 

INPUT 3

AUTO, COMPONENT, VIDEO

 

 

INPUT 4

AUTO, S-VIDEO, VIDEO

 

 

INPUT 5

PC digital, PC analogue,

 

AV digital, AV analogue

 

 

NOTE

If no (colour) image displays, try to change the other signal type.

Check the operation manual of the external equipment for the signal type.

52

Page 53
Image 53
Sharp TU-37GAX Fine Sync. adjustment PC input mode only, Input Select, Useful adjustment settings, Selecting input source