Preparation
Attaching speakers
LC-37G2X
1 | 5 |
Peel off the tape holding the ends of the cables, | Fasten the speaker cable with the holder. |
and move cables towards behind the display. | • Connect the ends of the cables to the speaker |
| terminals as shown in the illustration. |
2 | 6 |
Hook the W hole of the speaker to the screw of the | Fix the speaker terminal cover. |
Display. |
|
3 | 7 |
Turn the speaker to the front of the Display | Align the nub of the bracket into the groove and |
(direction of the arrow) and fit it to the screw hole. | fasten it. |
4 | 8 |
Fasten the screws.
NOTE
Fasten the bracket with the screw.
• | Perform the same steps for right speaker. |
|
• | To remove the speakers, perform the steps in reverse order. | 7 |
