Basic adjustment settings
Power control
Power control setting allows you to save energy.
Power control for AV source
No Signal off
When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Power control”.
• Power control menu displays.
3 Press a/b to select “No Signal Off”, and then press ENTER.
4 Press c/d to select “Enable”, and then press ENTER
•Five minutes before the power shuts down, remaining time displays every minute.
NOTE
•“Disable” is factory preset value.
•When a TV programme finishes, and the AVC System receives signal input, this function may not operate.
No Operation off
When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Power control”.
• Power control menu displays.
3 Press a/bto select “No Operation Off”, and then press ENTER.
4 Press c/d to select “Enable”, and then press ENTER.
•Five minutes before the power shuts down, remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
Power control for PC source
Power control setting allows you to save energy.
Power management
When set, the power will automatically shut down.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Power control”.
• Power control menu displays.
3 Press a/bto select “Power Management”, and then press ENTER.
4 Press a/b to select “Mode1” or “Mode2”, and then press ENTER.
Off
Mode1
Mode2
Selected item |
| Description | |
|
| ||
Off | • No power management | ||
• | Factory preset value. | ||
| |||
|
|
| |
| • | If no signal inputs for 8 minutes, the power | |
|
| shuts down. | |
| • | Even if you start using the PC and the signal | |
Mode1 |
| inputs again, the System stays off. | |
| • The System turns on again by pressing | ||
|
| POWER. (See page 19.) | |
|
|
| |
| • | If no signal inputs for 8 seconds, the power | |
|
| shuts down. | |
Mode2 | • When you start using the PC and the signal | ||
| inputs again, the System turns on. | ||
| • The System turns on again by pressing | ||
|
| POWER. (See page 19.) | |
|
|
| |
35
