Preparation
Where to place the System
“System” means the Display and AVC System. First select the location where to place the System.
1
Selecting the location of the System
• Select a place with no direct sunlight and good ventilation.
• The Display and the AVC System are connected by the system cable. (See page 9 for details.)
If you want to keep a longer distance between the
Display and AVC System, please purchase the optional system cable
System cable
AVC System Display
2
Setting the System in place
Handling the Display
CAUTION
•When using the TV with the supplied stand attached, do not remove the speaker. Doing so may disturb the balance leading to product damage or personal injury.
•Do not remove the stand and speaker from the Display unless using an optional bracket to mount it.
•Keep enough space above and behind the Display.
•The TV weighs about 22 kg
•When you move the Display, hold the portion of the Display, not the speaker.
Handling the AVC System
CAUTION
•Do not put a VCR or other device on the AVC System.
•Keep enough space above and on the sides of the AVC System.
•Do not block the ventilation openings on the top and left side, and the exhaust fan on the right side.
•Do not spread a thick cloth beneath the AVC System, or cover it with one, as this can cause overheating and result in malfunction.
CAUTION
Adjust the screen with both hands. Put one hand on the Display and tilt the screen while steadying the stand with your other hand.
You can adjust the screen vertically up to 2 degrees forward or 6 degrees back- ward, or rotate 10 degrees horizontally.
8
10 cm
or more
Keep enough space
5 cm or more
5 cm or more
on both sides
There is an exhaust fan on the right side.
