Preparation
Setting the System
After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the cable clamps for bundling the cables.
1 | Removing the terminal cover |
Display (rear view)
Press the two hooks toward the centre of the Display and remove the cover toward you.
Press down the two upper hooks to remove the cover toward you.
2 Connecting the system cable and the AC cord to the Display
(WHITE)
Connect the plug into the terminal and secure it by tightening the thumb screws.
(BLACK) | System cable | (GREY) |
| ||
AC cord |
| Connect the plug firmly |
| until the hooks on both | |
|
| sides click. |
3 Connecting the system cable and the AC cord to the AVC System
*Check the alignment of the terminals before inserting.
System cable
(WHITE)
AVC System (rear view)
(BLACK) 
(GREY)
AC cord
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH
AC CORD CONNECTED.
9
