Shindaiwa DG1000MI Initializing / preparation, Operation, Suffocation from exhaust fume, Injuries

9 Operation

9.1 Initializing / preparation

:Suffocation from exhaust fume

￿Exhaust fume from the engine contains many elements harmful to human.

Do not operate this equipment in poorly ventilated area, such as inside a room or in a tunnel

Caution :Suffocation from exhaust fume

￿Do not point the exhaust fume toward pedestrians or building.

Caution :Fire

￿Temperature around muffler and exhaust can get extremely high. Keep any inflammable items (such as fuel, gas, paint, etc.) away from the equipment.

￿Always operate this equipment on flat surface and, at least 1 meter away from any objects (wall, box, etc.).

Caution

:Injuries

￿Always place the equipment on a flat and stable surface, to keep the equipment from sliding.

￿When starting the engine, turn off the connected equipment and set the circuit breaker to OFF position.

Turn the circuit breaker for single-phase and 3-phase on the control panel to OFF position

①	Set the Throttle Lever to IDLING position.
②	Turn the starter switch to <START> position, and start the engine. In cold environment, turn
③	the starter switch to <Pre-heating> position, wait until the pre-heating status lamp comes on,
	and start the engine

						VOLTAGE
								PREHEAT
						REGULATOR
								LAMP
	FIXING SCREW
			THROTTLE LEVER
FREQUENCY ADJUSTING SCREW
				3-PHASE
				BREAKER
					1-PHASE
							THROTTLE LEVER
					BREAKER
									STARTER SWITCH
		- 32 -