Shindaiwa DG1000MI manual During operation

- 35 -

③

3-PHASE 400/440V

TERMINALS

BUS PLATES

2 PLATES OVERLAPPED

The 3-phase voltage is energized to the 3-phase output terminals.

Refer to 7-2. Connecting cable

Starting the engine and turning the 3-phase breaker to ON, the 3-phase current is sent to the 3-phase output terminals.

9.3 ④During Operation 9.3.1 Post startup check

￿ Make sure that all meters (gauges) and displays are working properly (refer to 5. Equipment)

￿ Check for any unusual vibration or noise

￿ Check for any unusual color from the exhaust. Under normal condition, the exhaust fume has no color or light bluish color.

<Caution>

￿If finding out abnormality, consult with the distributor or our engineering section in order to repair, without using the machine.

9.3.2During operation

￿Make minor adjustment to voltage and speed using the Frequency Adjusting Screw and Voltage Regulator, by monitoring frequency meter, and voltage meter

■Vacuuming the air out of the fuelling system in event of no fuel Refer to the User’s manual for Engine.

This※ generator is equipped with automatic vacuuming feature. Thus if the engine stops due to running out of fuel, follow the next steps to vacuum the air out.